linux-wlan-ng

linux-wlan-ngの使用方法です。

URL

http://www.linux-wlan.org/

SOURCE

linux-wlan-ng-0.2.1-pre26.tar.bz2

PATCHES

filelinux-wlan-ng-0.2.1-pre26-ekit1100.patch

MAKE

# tar jxf linux-wlan-ng-0.2.1-pre26.tar.bz2
# cd linux-wlan-ng-0.2.1-pre26
# cat linux-wlan-ng-0.2.1-pre26-ekit1100.patch | patch -p1
# ./Configure

	Build Prism2.x PCMCIA Card Services (_cs) driver? (y/n) [y]:
	Build Prism2 PLX9052 based PCI (_plx) adapter driver? (y/n) [n]:
	Build Prism2.5 native PCI (_pci) driver? (y/n) [n]:
	Build Prism2.5 USB (_usb) driver? (y/n) [n]: y
	Linux source directory [/lib/modules/2.x.xx/build]: /export/src/linux
	Alternate target install root directory on host []: /home/rootfs/rootfs
	PCMCIA script directory [/etc/pcmcia]:
	  Module install directory [/lib/modules/2.x.xx]:
	Prefix for build host compiler? (rarely needed) []:
	Build for debugging (see doc/config.debug) (y/n) [n]:

# make clean
# make CROSS_COMPILE=mipsel-linux-uclibc- LDFLAGS="-s -static" all
# make install

/etc/pcmcia/config

device "prism2_cs"
  class "wlan-ng" module "prism2_cs"

card "MELCO WLI2-CF-S11"
  version "BUFFALO", "WLI2-CF-S11"
  bind "prism2_cs"

card "IO DATA WN-B11/CFZ"
  version "IO DATA", "WNB11CFZ Wireless LAN Adapter"
  bind "prism2_cs"

/etc/wlan/wlan.conf

SSID_wlan0="xxxx"
ENABLE_wlan0=y

/etc/wlan/wlancfg-xxxx

lnxreq_hostWEPEncrypt=true
lnxreq_hostWEPDecrypt=true
dot11PrivacyInvoked=true
dot11WEPDefaultKey0=xx:xx:--:xx:xx

添付ファイル: filelinux-wlan-ng-0.2.1-pre26-ekit1100.patch 618件 [詳細]

トップ   編集 凍結 差分 バックアップ 添付 複製 名前変更 リロード   新規 一覧 単語検索 最終更新   ヘルプ   最終更新のRSS
Last-modified: 2005-05-06 (金) 20:53:29 (4965d)